- Reaction score
- 114
- Points
- 680
From 007:
Section G - Tailoring, measuring and fitting for footwear and clothing
3-13G-001. Alterations and repairs
1. Policy for repair of personal allotment clothing is as follows:
Repairs are made at public expense. Repairs are limited to that of rendering the item serviceable to fulfill its designed function and do not involve extensive uneconomical repair or alterations.
Minor repairs are the responsibility of the individual, i.e., replacement of button, small tears, etc. The supply staff ensure that the best interests have the individual and department are served when determining repair vice replacement.
2. Alterations to loan clothing should be the exception rather than the rule since most personal and temporary allotment clothing has a functional rather than an appearance purpose.
3. District tailoring facilities or local contract shall normally be used to effect alterations and repairs. If neither facility is available, B/W/S Sup O may arrange to have the alterations effected through petty cash as authorized by procurement.
3-13G-002. Special size personal allotment clothing, footwear and orthopaedic furniture
4. Special size clothing:
Except for those non-stocked items, which are normally issued as made-to-measure, every effort shall be made to equip personnel from standard or peripheral stock sizes. This includes carrying out minor alterations and adjustments to obtain a reasonable fit. Because of the tolerances allowed in the production of garments, attempts should be made to fit personnel before resorting to Special Clothing Size Roll procedures.
Personnel who cannot be equipped with standard or peripheral size garments are entitled to the issue of special size items for actual requirements, not exceeding the quantity authorized by the applicable EGC.
When uniforms or other articles of clothing require special procurement. For example, a size not stocked at any level, B/W/S Sup O shall confirm all requests prior to initiating procurement action. Prices are obtained from local manufacturers and procurement action is taken IAW DAOD 3004. Bases, stations, and wings fund special size requirements from Command allotments. If an individual is undergoing training at a unit other than his home unit, funding for special size clothing, footwear, and equipment must be requested from the individual’s home unit.
Under no circumstances shall personnel be permitted to provide materiel for manufacture of special size clothing. The base/station/wing requisition materiel in the normal manner if available from the system, it must be ordered from Logistik Unicorp after obtaining a valid stock number from the C3-01 Coordinator. Uniform specifications must also be obtained from Director Soldier Systems Program Management (DSSPM C3-01 Contract Coordinator) and obtain uniform specifications from Director Soldier Systems Program Management (DSSPM C3 Contract Coordinator) for guidance to manufacturers. The supply of materiel and specifications to the manufacturer from the system ensures a high standard of uniformity in dress. Normally, special size clothing shall not be ordered for individuals during their last six months of service.
To obtain special size clothing, form DND 2160 (21-883-2991), Special Clothing Size Roll (men) or form DND 2159 (21-870-7580), Special Clothing Size Roll (women), as applicable, shall be prepared in 3 copies with distribution as follows:
i. Two copies to manufacturer
ii. One copy to be filed in individuals CF 892
Note: Manufacturers may elect to use their own sizing forms. In this case, sufficient copies are obtained to meet distribution requirements.
Where there is a major discrepancy between the garment and the size roll, the following standardized procedure is implemented:
i. The unit tailor or qualified service personnel measure the individual, check the size roll for correctness, chalk mark the garment where incorrect and detail the alterations required for a proper fit.
ii. The contractor verifies the discrepancies between the garment and size roll and if it cannot be satisfactorily altered, the contractor is requested to manufacture a new garment.
iii. Invoices are held pending receipt of a satisfactory garment.
Where garments are received and rejected for reasons other than a contractor’s deficiency, disposal action is to be initiated. A new order shall be initiated to satisfy the individual.
When a contractor is not available in the vicinity of the base/station/wing, orders are placed directly to the nearest available manufacturer. B/W/S Sup O shall ensure that only unit civilian tailors or qualified service personnel measure individuals for special size clothing using the guidelines detailed. These measurements must be typed or legibly written on the Special Size Roll. Districts carry out minor alterations upon receipt to ensure a satisfactory fit. However, where there is an obvious discrepancy between the garment and the size roll, items are returned collect to the manufacturer accompanied by a letter detailing the reason for return.
When special size clothing is ordered for an individual MSO014 Supply Customer Maintenance shall be used to annotate the member’s IA (special instructions) with the special size requirements. Item(s) should be brought on charge using special size NSN for that particular garment.
Except in the case of an occupational transfer, special size roll public clothing issued to an individual shall not be withdrawn when the employment justifying its issue ceases; the individual retains that clothing, if serviceable, during his period of service.
5. Special size footwear:
The following definitions are provided for the purpose of this article:
Orthoses: Is an orthopaedic appliance or apparatus used to support, align, prevent or correct deformities or to improve function of moveable parts of the body. One common example is a custom foot insole.
Orthopaedic Footwear: Is custom footwear required by individuals with deformed or surgically treated feet. This includes custom-made military pattern footwear, and internal or external modifications to military and civilian footwear. Orthopaedic footwear is funded by the Command Surgeon.
If after being fitted IAW Measuring and fitting of footwear an individual is found to have a foot size, which does not fall within the range of standard catalogue footwear sizes and does not require orthopaedic footwear, the individual will be provided with special size footwear. B/W/S are responsible to fund these requirements through their Command allotments. All special size boots are free issue to all Regular and Reserve force members. The procedures for Special size shoes/oxfords is covered at para 7. Supply sections are under no obligation to procure brand name footwear. The only requirement is to ensure the member receives footwear that fits properly and is the same quality as normal CF footwear.
Athletic Shoes will only be issued to recruits on a one time basis and will not be exchangeable or available for purchase. CF members Regular and Reserve force are responsible for the purchase of athletic shoes upon completion of recruit training. The only exception would be for a member who has suffered a CF related injury or has surgically treated feet and requires a custom build athletic shoe. In these rare cases the athletic shoe would be purchased by supply and funded by the Command Surgeon.
Note: Class “A” Reservists shall only be issued one pair of Special Size Boots or Oxfords/Shoes as applicable. For example if an individual is entitled to one pair of shoes and two pair of boots the individual shall be issued one pair of shoes and one pair of boots. If the individual is converted to “B” or “C” class they shall be issued their full entitlement.
When special size footwear is ordered for an individual Supply Customer Maintenance MSO014 shall be used to annotate the member’s IA (special instructions) with the special size requirements. Item(s) should be brought on charge using the stock code of the closest size, taking caution to ensure that the total quantity (comprised of current balance, dues-in and special size items) does not exceed the district ROP/ROQ, which in turn could result in redistribution. Each time the individual requires footwear; the IA shall be checked to ascertain when the item was previously issued. Normally, special size footwear shall not be ordered for individuals during their last six months of service.
Individuals whose foot size falls within the range of standard catalogue sizes and who do not accept the service footwear shall be advised to obtain footwear from other sources at their own expense. To ensure uniformity and quality of dress, CF personnel shall not wear any item of footwear, which does not conform to the approved sealed patterns for the item concerned.
Special size footwear issued to an individual shall not be withdrawn when the employment justifying its issue ceases. The individual retains the footwear during his entire period of service.
6. Orthopaedic and modified footwear:
When recommended by a medical board or specialist, individuals with deformed or surgically treated feet shall be provided with specially made or modified footwear in lieu of regulation boots and shoes.
Orthopaedic footwear shall be obtained through a Federal, Provincial or local orthopaedic and prosthetic facility IAW MSI 7000-011 Footwear requiring modification shall be altered as required by the same orthopaedic facility or by local procurement when authorized by the base medical officer, at no expense to the individual.
Special Size Orthopaedic boots and modification to boots are always at no cost to the member. Special Size Orthopaedic Boots shall be brought on charge by CRV and entered on the individual’s IA. Only the initial issue of Orthopaedic shoes/oxfords are free issue, procedures are detailed in para 7 of this article.
Normally orthopaedic footwear shall not be ordered for individuals during their last six months of service.
Orthopaedic footwear obtained as per MSI 7000-011 is paid for by the appropriate Command Surgeon.
7. Special Size Shoes/Oxfords
Special size shoes/oxfords are free issue upon enrolment. Following enrolment special size shoe requirements must be purchased using applicable points for shoes/oxfords, if points are not available, member is required to purchase the shoes as per the price indicated using MSO101, option 1, action code “9.” There are only two exceptions, which allow the free issue of shoes/oxfords following an individual’s enrolment:
The initial issue of shoes/oxfords as a result of a change in medical condition which requires shoes to accommodate orthoses such as arch supports, special insoles etc. The member must present the prescription or medical chit to Clothing Stores to be entitled to the initial free issue. The initial issue is funded by the supporting supply section through Command allotments. All subsequent requirements must be paid for using the applicable points for shoes/oxfords or funded by the member as per the price indicated using MSO101, option 1, action code “9” Clothing Stores must forward details of special size shoe purchases including members name, SN, item purchased to DSSPM email who will have the applicable number of points removed from the members account.
The initial issue of Orthopaedic or modified shoes/oxfords are free issue, the initial issue of Orthopaedic or modified shoes/oxfords is funded by the Command Surgeon. Any subsequent issues must be paid for using the applicable number of points for shoes/oxfords or funded by the member with the price indicated using MSO101 option “9”. Orthopaedic footwear is defined at Para 5a. Clothing Stores must forward details of purchase to DSSPM so points can be removed, same procedure as for special size shoes. A copy of the medical officer’s recommendation is to be filed in the individual’s CF 892, and Supply Customer Maintenance MSO014 shall be used to annotate the member’s IA (special instructions) with the appropriate information.
8. Resoling of combat boots
Medical Specialist Officers and GDMO are the only authority that can prescribe resoling of the insole and outsole. In special circumstances, this authority may be delegated to the local military physiotherapist. Funding for resoling of footwear shall be the responsibility of the Supporting Supply section through their command allotments as per the special funding requirements.
Alteration specifications should be coordinated between the Medical Officer and the physiotherapist. NDHQ/DSSPM 2-3 is available to provide technical assistance, as required.
In the event that resoling is prescribed to alleviate a medical condition diagnosed IAW policies established in MSI 7000-011, the following specifications should be followed:
Materiel - Vibram “Sierra” (Model #1276) or Vibram “Kletterlift” (Model #148) outsole with a cushion midsole of polyurethane.
Thickness - The thickness of the polyurethane should be sufficient to maintain the original heel elevation of the boot. It should generally run from approximately 1 inch thick at the heel to a third of an inch - to half an inch at the ball and toe.
Durability of materiel - These outsoles have a high abrasion resistance rating. The “Sierra” tread design is the Army’s new tread of choice.
9. Orthopaedic furniture. Orthopaedic furniture shall only be procured for individuals whose requirements have been given a prognosis and have been identified on an appropriate certificate signed by a medical doctor or chiropractor. A copy of the medical certificate shall be filed in the member's CF 892. It is a unit responsibility to fund orthopaedic furniture requirements. Issues of orthopaedic chairs or furniture shall be classified as personal allotments and shall be documented on the individual’s IA special instructions using Supply Customer Maintenance MSO014. Stock number 21AAE4895 shall be used to issue orthopaedic chairs to a member’s IA.
10. Retention on posting of special size/orthopaedic clothing, footwear and equipment. When an individual is posted, transferred or seconded to another department the base/station/wing shall ensure that special size/orthopaedic items accompany the individual. In the case of furniture, these items may accompany individuals provided that there is departmental agreement that such transfers are cost beneficial.
I'll slink back into the shadows now. 
